产品组立-产品组装设计讲义(ppt58)-经营管理(编辑修改稿)

产品组立-产品组装设计讲义(ppt58)-经营管理(编辑修改稿)内容摘要：

he new part by clicking a part face, a part edge, or another plane. 7. Define the xaxis origin of the new part by clicking near one end of the displayed reference axis. 8. Define the origin of the reference planes for the new part. 9. Design the New Part in the modeling environment. 10. When done modeling return to the Assembly File to continue the topdown process. Create in Place (IPA) (3) Remark: You can use the other parts in the assembly to help you design the new part. For example, you can include edges from another part in the assembly to quickly construct a profile for the new part. All IPA parts are grounded. you can return to the assembly, delete the ground relationship, and apply other assembly relationships to permanently position the new part. Exercise 4 (1)  An assembly with the following parts: Exercise 4 (2)  Create a part in place as shown: Part Colors(零件顏色 ) Display of Parts Toggling the Display of Parts Hiding Parts Showing Parts Show Only Explode(爆炸、分解 ) (1) 啟動：主功能表 環境 爆炸視圖 Automatic Explode（ 自動爆炸） The Automatic Explode mand explodes assemblies based on the relationships applied between parts. In assemblies where the parts are positioned using mate or axial align relationships. Manual Explode（ 手動爆炸） The Explode mand gives you more control over assembly explosions Use Explode for assemblies where many of the parts were positioned without using a mate or axial align relationship or when you want to explode the parts in a different direction than the Automatic Explode mand uses. Explode(爆炸、分解 ) (2) Manual Explode（ 手動爆炸） Steps Select the parts you want to explode. On the SmartStep ribbon bar, click the Accept button. Select the stationary part. On the stationary part, select a face or reference plane to define the explode vector. Note: An arrow is displayed near the element you selected. Position the cursor so the dynamic arrow is pointing in the direction you want, then click. Explode (3) Move/Adjust Part（ 調整零件距離） The Move mand allows you to move a part along its explode vector. The part must be exploded first in order to define the explode vector for moving a part. The Move mand cannot reorder parts in an exploded view by moving a part past any adjacent parts. Reposition Part（。