irix系统管理(编辑修改稿)

irix系统管理(编辑修改稿)内容摘要：

46 关闭电 源 ....................................................................................................................................... 46 二、 SGI ORIGIN 2020 SERVER的开启与关闭 ...................................................................................... 47 开启电源 ....................................................................................................................................... 47 启动系统 ....................................................................................................................................... 47 关闭系统 ....................................................................................................................................... 47 关闭电源 ....................................................................................................................................... 48 IRIX 系统管理 第 5 页 共 49页 第一章 IRIX 安装及配置 一、系统参数： 硬件： O200 CPU 类型： IP27， 180MH 软件： (最小安装需 4 张光盘 ) IRIX Installation Tools IRIX Foundation 1 IRIX Foundation 2 IRIX Applications 二、分区： 使用光盘启动系统进行分区： SGI O200出厂时已经预装操作系统，因此系统硬盘不必重新分区。 增加的硬盘改变分区可以在操作系统正 常启动后使用“ fx x”命令重新分区。 如系统硬盘是空的硬盘，进行如下步骤： System Maintenance Menu 1) Start System 2) Install System Software 3) Run Diagnostics 4) Recover System 5) Enter Command Monitor IRIX 系统管理 第 6 页 共 49页 Option? 5 Command Monitor. Type exit to return to the menu. 插入“ IRIX Installation Tools”光盘 hinv “查看系统硬件配置” System SGIIP27 “ IP27CPU类型” 1 180 MHz IP27 Processors Main memory size: 128 Mbytes Integral SCSI controller 0 Integral SCSI controller 1 Integral Fast Ether IOC3 serial port Disk drive: unit 1 on SCSI Controller 0, (dksc(0,1,0)) CDROM: unit 6 on SCSI Controller 1, (cdrom(1,6,7)) “ cdrom(1,6,7)光驱在 1号 控制器 6单元” boot f dksc(1,6,8)sash64 dksc(1,6,7)stand/ x sash版本 fx版本 “ sash、 fx 版本由 CPU 类型决定” 896+115812+16653+3832 entry: 0xa8000000012a7e2c 2112+115940+28805+10680 entry: 0xa800000000fd3eac SGI Version ARCS BE64 Apr 30, 1998 fx: devicename = (dksc) “ dksc是 SCSI硬盘名称” fx: ctlr = (0) “ SCSI控制器号” fx: drive = (1) “单元号” ...opening dksc(0,1,0) “ dksc(0,1,0)系统硬盘” 注：对某个硬盘分区，改变 ctlr、 drive 参数 ...drive selftest...OK Scsi drive type == SGI QUANTUM XP34550WLXY7 please choose one (? for help, .. to quit this menu) [exi]t [d]ebug/ [l]abel/ [a]uto [b]adblock/ [exe]rcise/ [r]epartition/ fx r partitions “系统硬盘由操作系统自动分区” part type blocks Megabytes (base+size) 0: xfs 1052672 + 7835871 514 + 3826 1: raw 4096 + 1048576 2 + 512 8: volhdr 0 + 4096 0 + 2 10: volume 0 + 8888543 0 + 4340 capacity is 8888543 blocks please choose one (? for help, .. to quit this menu) IRIX 系统管理 第 7 页 共 49页 [ro]otdrive [o]ptiondrive [e]xpert [u]srrootdrive [re]size fx/repartition .. please choose one (? for help, .. to quit this menu) [exi]t [d]ebug/ [l]abel/ [a]uto [b]adblock/ [exe]rcise/ [r]epartition/ fx exi Installing PROM Device drivers ............ Walking SCSI Adapter 0 (/hw/module/1/slot/MotherBoard), (pci id 0) 1+ 2 3 4 5 6 7 8 9 10 11 12 13 14 15 = 1 device(s) Walking SCSI Adapter 1 (/hw/module/1/slot/MotherBoard), (pci id 1) 1 2 3 4 5 6+ 7 = 1 device(s) Initializing PROM Device drivers .......... DONE Checking hardware inventory ............... DONE 附： repartition子命令： rootdrive Repartition as system drive with root,swap,vh,and vol partitions usrrootdrive Repartition an oldstyle system drive with root partition,swap, usr,vh,vol optiondrive Repartition as option drive with one large efs/xfs,vh,and vol partitions resize Resize the standard partitions (depending on whether you choose root,usrroot,or option drive) expert Use expert mode for be used for creating IRIX分区类型 分区名称 分区号 root 0 swap 1 usr 6 (none) 7 volhdr 8 (none) 9 volume 10 xfslog 15 三、系统安装： System Maintenance Menu IRIX 系统管理 第 8 页 共 49页 1) Start System 2) Install System Software 3) Run Diagnostics 4) Recover System 5) Enter Command Monitor Option?2 Installing System Software... Press Esc to return to the menu. 1) Remote Directory 2)[Local CDROM] *a) Local SCSI CDROM drive 6, on controller 1 Enter 12 to select source type, a to select。