建筑工程毕业实习报告范本内容摘要:
agement authority, and so on. With the historical process, after recovery, reform and development, formed a relatively plete budget estimate of quota management system. However, as the socialist market economic development, the system39。 s many problems have also exposed. Generally speaking, the budget estimate is based on direct participation in the management of national economic 7 activity as a precondition. enterprise is not the actual economic entities. Due to the characteristics of the planned economy, and, at the time under the conditions of productivity, will inevitably bee a shortage in the economy. In severe shortage of modities under the conditions, as long as a certain level of investment, will be certain outputs. In this environment, the project planning and technical argumentation there can be no economic analysis. State control of the project cost constitute key factors equipment and materials prices, wages and taxes of artificial distribution. In this relatively stable economic environment, the budget estimate for the system approved project cost, help the government to carry out investment plans to play a major role. As the socialist market economic system established, requires us to predict project investment and control. In recent years, international investment project developed to the requirements of prior precontrol and in the middle of control. China, the traditional practice in an objective light on the cause decisionmaking, implementation heavy, light the economy and technology, First, the consequences of victimization Due to the technical personnel of the project technical and economic concepts and a weak awareness of cost control, cost management makes the quality difficult to raise. Project Cost control is difficult to achieve longterm goals. Second, the various stages of the project management view of the above circumstances, My first academia in the 1980s made the whole process of cost management and control concept, building departments will study the feasibility of projects and the budgets and final accounts to two extended at the request of the corresponding regulations put our cost management concepts and methods referred to a new height. Our task now is to be modern and cost management in line with China39。 s national conditions of the market economy system goal, learn from the advanced experience of the developed countries, and establish sound market economic laws of project cost management system, efforts to increase the project cost levels. An investment decisionmaking phase of the project cost management construction project investment decisionmaking stage is proposed project proposals。 conduct a feasibility study to determine investment estimation and the final preparation of design task. At this stage, the project39。 s technical and economic decisionmaking, of the construction project cost of the project after the pletion of the economic benefits have a decisive influence, The construction cost is an important stage control. China39。 s current stage of the project cost for the project management for the purpose of clearing price, and focusing only on the construction process of cost control, neglected before the start of the project investment decisionmaking stage of cost control. Investment decisionmaking phase。建筑工程毕业实习报告范本
相关推荐
现象;弯扁度大于管外径的 10%;弯 曲半径大于规定值; (4)管路超过规定长度上 限值时未加接线盒及补偿装置; (5)进入箱、盒的排管长短不一,排列不齐或不到位; (6)明配管路不平不直,排列不齐,固定点不符合规定,油漆污染; (7)管路与煤气、热力、蒸汽等管路平行或交叉敷设间距不符合要求时,未采取相应隔离措施; (8)暗敷设位置不当,不能保证足够保护层,或保护未用高标号水泥砂浆。
准点高程 (m) 观测日期: 自 年 月 日起 至 年 月 日止 观 测 点 观测时间 实测标高 (m) 本期沉降量 ( mm) 总沉降量
效力待定合同。 (1) 合同的生效:。 自成立时生效。 ,若法律。 行政规定;合同应办理批准手续。 12 (2) 无效合同 (3) 可撤销合同 (4) 效力待定合同 合同的履行与担保 1. 合同履行的概念和原则 ( 1)合同履行的概念。 合同履行,是指合同生效后,双方当事人按照合同的规定全面适当地完成了各自义务,享受了各自的合同权利,使双方当事人的合同目的得以实现的行为。 ( 2) 履行合同应
柱上,单工用手势指引我移动塔尺,定出标高控制点。 我用红笔在钢筋上画出红线,再胶带纸贴上一圈,做好标记。 三、 工程 资料 的 收集 与管理 在工程项目部里,我主要跟着单工实习了以上 两项 工作, 在 2 月27 日后我的实习工作主要做工程资料的收集和管理,而测量放线,打水平工作我依旧在师傅需要帮忙时去现场帮忙,其他部分楼层 测量层高垂直度等工作 我也时常去实践下。 在资料管理工作中,对于
阻值应大于 MΩ ,直流屏所附蓄电池组的充、放电应符合产品技术文件要求;整流器的控制调整和输出特性试验应符合产品技术文件要求。 一 般 项 目 柜、屏、台、箱、盘相互间或与基础型钢应用镀锌螺栓连接,且防松零件齐全。 柜、屏、台、箱、盘安装垂直度允许偏差为 ‰,相互间接缝不应大于 2mm,成列盘面偏差不应大于 5mm。 柜、屏、台、箱、盘内检查试验应符合下列规定: 1)控制开关及保护装置 的规格
............................... 8 隔离层检验批质量验收记录表 ......................................................................................................... 9 填充层检验批质量验收记录表 .............................