某家用电器公司1201检验和试验状态控制程序(编辑修改稿)

某家用电器公司1201检验和试验状态控制程序(编辑修改稿)内容摘要：

eipt of the “Acceptable Products Requisition” the storekeeper shall conduct the ining procedure. b) 半成品经检验和试验合格后，在《作业流程卡》上签署检验印章，并将产品分区存放。 After semifinished products passed the inspection and test, Operation Flow Card should be chopped. They shall be stored by zone, c) 经检验和试验合格的成品，由质量部检验员签发 《 合格通知单 》 交库 房保管，由仓库保管员按指定区域存放，作好相关标识，并作记录。 The finished products that have passed the inspection and test shall be issued with “Acceptable Products Requisition” by the Quality Department and then be stored in finished product warehouse. The storekeeper shall store them at a designated zone and make appropriate labels and records. 不合格状态 Unacceptable Status a) 原材料、协配件经质量部检验和试验为不合格时，由检验员开具 《 不合格品通知单 》 ，并通知有关单位，执行《不合格品控制程序》。 仓库保管员接到通知后立即换上不合格标识，隔离存放。 If the raw materials and accessory parts prove to be unacceptable through inspection and test, the Quality Department shall issue “Unacceptable Parts Requisition”, notify relevant departments and carry on “Nonconforming Product Control Procedures”. At receipt of the notice, the storekeeper shall change to an “Unacceptable” label and store the goods in isolation. b) 车间生产的半成品、成品经检验为不合格后换上不合格标识，并分区隔离存放，按《不合格品控制程序》通知相关部门进行评审处置。 If the semifinished and finished products in the workshop are inspected to be unacceptable, they shall be changed with an “Unacceptable” label and be stored in isolation. Notify relevant departments and implement the re。