机械

transport vehicle is connected to the lower end of the hook, also included with the trailer body is connected with the vertical rod, one end of the vertical rod and the upper end of the first

t of antilock braking system (ABS), for improving vehicle braking and handling performance, involves mechanism electronics, hydraulics, hardware and software design and field test validation, and

of this study was to design and implement an integrated Telemedicine system, able to handle different Telemedicine needs especially in the fields of: 机械专业中英文文献翻译 10 • Emergency health care provision

was rested another 15 min in the rheometer, before each measurement, allowing relaxation of stresses induced during sample loading to relax. All measurements were performed at a heating rate of

举办过实验。 在这方面，动态分析和监测数据足以在一个几分之一秒获得，对于任何一个时间尺度发生热变形微不足道。 定子装配在一个固定的容积里，这是为了方便由三个加工，维修和试验台调整部分组成。 所有可能的渗漏路径是密封由 O型圈。 在住房流体密封加压水。 连接轴的控制，通过两个滑轮和一个定时带直流电动机的速度驱动的主轴。 压缩空气是由主供气线，以通过在转子室的住房与轴孔。 它是由一个密封唇密封一端

around the pitch cylinder they are called threads. Its mating gear is called a worm gear, which is not a true helical gear. A worm and worm gear are used to provide a high angularvelocity reduction

up. Weightlessness mixer Brief Description: weightlessness mixer is mainly used for dry mortar production process, is the most highspeed dry mortar mixer. Details: Weightlessness mixer works:

有一半用上了该项技术，有的企业 甚至已达 80%以上；气体辅助注射成型也是塑料成型的一种新工艺，它具有注射压力低、制品翘曲变形少、 表面好、易于成型、壁厚差异可以较大等优点，可在保证产品质量的前提下，大幅度降低成本。 （ 4） 提高模具标准化水平和模具标准件的使用率 模具标准化及模具标准件的应用将极大地影响模具制造周期，还能提高模具的质量和降低模具制造成本。 模具标准件应进一步增加规格、品种

from warm to cold areas at a rate proportional to the temperature gradient and the thermal conductivity of the wire it is owing through. A thermocouple is connected to the hot wire to give a reading

on to is developing variously. Now CAD/CAM market. Now in the market has four kind of different CAD/CAM is some subordinate panies sells es from a big enterprise part or the branch CAD/CAM IBM